MSI C847IS-P33 FreeBSD 10.1Rインストール (FreeBSD 10.1R、2014/11/15) [FreeBSD]
10.1RのISOがアップロードされていたので、中身を入れ替えてみました。
Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (1097.53-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xdbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4027912192 (3841 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard random: <Software, Yarrow> initialized kbd1 at kbdmux0 acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <SandyBridge mobile GT1 IG> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d07000-0xf7d073ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 hdac0: <Intel Panther Point HDA Controller> mem 0xf7d00000-0xf7d03fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c04000-0xf7c04fff,0xf7c00000-0xf7c03fff irq 18 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 11:22:33:44:55:66 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d06000-0xf7d063ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel Panther Point SATA300 controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atapci1: <Intel Panther Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 random: unblocking device. usbus0: 480Mbps High Speed USB v2.0 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa0 pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG HD103SI 1AG01113> ATA-7 SATA 2.x device ada0: Serial Number S1XGJ9BSA03121 ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ata2 bus 0 scbus0 target 1 lun 0 ada1: <SAMSUNG HD103SI 1AG01113> ATA-7 SATA 2.x device ada1: Serial Number S1XGJ9BSA03120 ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad5 SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 1097533168 Hz quality 1000 GEOM_MIRROR: Cancelling unmapped because of ada1p1. GEOM_MIRROR: Cancelling unmapped because of ada0p1. GEOM_MIRROR: Device mirror/gm0p1 launched (2/2). GEOM_MIRROR: Cancelling unmapped because of ada1p2. GEOM_MIRROR: Cancelling unmapped because of ada0p2. GEOM_MIRROR: Device mirror/gm0p2 launched (2/2). GEOM_MIRROR: Cancelling unmapped because of ada1p3. GEOM_MIRROR: Cancelling unmapped because of ada0p3. GEOM_MIRROR: Device mirror/gm0p3 launched (2/2). GEOM_MIRROR: Cancelling unmapped because of ada1p4. GEOM_MIRROR: Cancelling unmapped because of ada0p4. GEOM_MIRROR: Device mirror/gm0p4 launched (2/2). GEOM_MIRROR: Cancelling unmapped because of ada1p5. GEOM_MIRROR: Cancelling unmapped because of ada0p5. GEOM_MIRROR: Device mirror/gm0p5 launched (2/2). GEOM_MIRROR: Cancelling unmapped because of ada1p6. GEOM_MIRROR: Cancelling unmapped because of ada0p6. GEOM_MIRROR: Device mirror/gm0p6 launched (2/2). Root mount waiting for: usbus1 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus1 usbus0 uhub3: 4 ports with 4 removable, self powered uhub2: 4 ports with 4 removable, self powered ugen1.3: <vendor 0x099a> at usbus1 ukbd0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus1 kbd2 at ukbd0 Trying to mount root from ufs:/dev/mirror/gm0p2 [rw]... uhid0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> on usbus1
コメント 0