FreeBSD 9.1Rインストール (FreeBSD 9.1R、2012/12/09)

9.1Rのタグが打たれているので、9.1 RC3をインストール後、アップデートしてFreeBSD 9.1Rにしてみました。恒例のdmesgです。
※2013/7/16にこの過去記事を吹き飛ばしてしまったので、Googleキャッシュから復旧させました。新規投稿ではないのでご注意を。

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0: Sat Dec  8 17:01:32 JST 2012
    root@atom:/usr/obj/usr/src/sys/GENERIC i386
CPU: Intel(R) Atom(TM) CPU  330   @ 1.60GHz (1596.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106c2  Family = 6  Model = 1c  Stepping = 2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2076348416 (1980 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL  D945GLF2>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP/HT): APIC ID:  3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <INTEL D945GLF2> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 6c00000 vs 6bfffff
pcib0: Length mismatch for 3 range: 70000001 vs 70000000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20e0-0x20e7 mem 0x88200000-0x8827ffff,0x80000000-0x87ffffff,0x88280000-0x8829ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 7932k stolen memory
hdac0: <Intel 82801G HDA Controller> mem 0x882a0000-0x882a3fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x1000-0x10ff mem 0x88100000-0x88100fff,0x88000000-0x8800ffff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:11:22:33:44:55
pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2080-0x209f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2060-0x207f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x882a4000-0x882a43ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20b0-0x20bf irq 18 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0x20c8-0x20cf,0x20ec-0x20ef,0x20c0-0x20c7,0x20e8-0x20eb,0x20a0-0x20af irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC662 (Analog)> at nid 20 and 24,25,26 on hdaa0
pcm1: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa0
pcm2: <Realtek ALC662 (Onboard Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG HD103SI 1AG01113> ATA-7 SATA 2.x device
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ata3 bus 0 scbus2 target 0 lun 0
ada1: <SAMSUNG HD103SI 1AG01113> ATA-7 SATA 2.x device
ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 12469657 Hz quality 1000
GEOM_MIRROR: Device mirror/gm91_ launched (1/1).
GEOM_MIRROR: Device mirror/gm0 launched (1/1).
GEOM: mirror/gm91_s1: geometry does not match label (16h,63s != 255h,63s).
GEOM: mirror/gm0s1: geometry does not match label (16h,63s != 255h,63s).
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen4.2: <PQI> at usbus4
umass0: <PQI PQI USB Flash Drive, class 0/0, rev 2.00/1.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:4:0:-1: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Generic USB Flash Disk 8.07> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 3858MB (7901184 512 byte sectors: 255H 63S/T 491C)
GEOM: da0: geometry does not match label (64h,33s != 255h,63s).
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/mirror/gm91_s1a [rw]...
ugen2.2: <vendor 0x099a> at usbus2
ukbd0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus2
kbd2 at ukbd0
uhid0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus2

9.0Rと特に何も変わっていないような気はします。ただインストール時、gmirror周りはかなり苦戦しました。RC3だったからかな？